PL0100 Swing Handles - Cam Control

Material

Type One: Body & Handle: die cast zinc, black powder coated.
Type Two: Body: Polyamide PA6, black. Handle: die cast zinc, black powder coated.
Cylinder lock: die cast zinc, chrome plated.
Supplied with: Keys: two per lock.
Not supplied: Cam: order separately.

Technical Notes

Order cam separately.
Cams: see suitable cam CC0020, and CC0040. Select "without projection" cam type. We recommend a 4mm thick cam for best functioning.
Dimensions ch and cl relate to cam. Use formula to calculate ch (required cam off-set), and refer to cam selection chart;
ch = h - lh where;
ch = required cam off-set/height.
h = grip length (distance between inside of latch face and front of cam).
lh = body length of cam latch/lock to be used (see product table below).
Rods & Guides: to achieve 3-point latching - CC0340, CC0350, CC0355.

Tips

90° degree handle rotation combines with rod latch to open or close. All die cast metal construction provides higher strength than standard models. Ideal for electrical cabinets, telecom racks or enclosures max. panel thickness of 1 to 4mm. For use inside of cabinet gasket. Universal left/right.

Referral

Rod control model - PL0500.
Gaskets - GA0010 to GA0100.
Also available with radial pin lock, subject to min. order quantity

Product Datasheets

PL0100 Swing Handles - Cam Control	696 kB
Swing Handles	1 MB
Access Hardware	27 MB

If you can't read the product files please follow this link to install Adobe Acrobat Reader.